Visas kategorijas
1450

Saņem 15.04.

Ielikt grozā Daudzums:

Piegādes veidi:

ADDRESS Saņem piegādi uz adresi
14.04.2020

Preces galvenie parametri:

  • Pielietojums: Iekšdarbiem
  • Paredzētās virsmas: Koks
  • Spīdums: Spīdīga
Vairāk par šo preci
DĀVANA:

Bezmaksas piegāde uz "K-Senukai"!

Detalizēta informācija

Ražotājs Master Team
Pielietojums Iekšdarbiem
Paredzētās virsmas Koks
Spīdums Spīdīga
Tilpums (l) 3
Atšķaidītāja veids Ūdens
Patēriņš vienai kārtai (m2/l) 10 - 15
Žūšanas laiks pirms pieskaršanās (h) 2
Žūšanas laiks pirms nākamās kārtas (h) 8
Pilnais žūšanas laiks (h) 24
Krāsošanai izmantojamie instrumenti Ota
Rullītis
Smidzinātājs
Īpašas atzīmes Nav informācijas

Preces apraksts

Preces apraksts angļu valodā:







It is intended for wooden walls, ceiling tiles, plywood, OSB panels, wooden and wicker products. Suitable for varnishing mineral surfaces (bricks, concrete, plaster). Designed for interior work. The dry film is clear, strong, resistant to frosts, cold and heat. Contains no organic solvents!

Varnishing Stir well before lacquering! The varnish can be applied manually, by brush, by roller or by spraying. It is recommended to lacquer 2 to 3 layers. Drying time – up to 2 hours at + 23°C. For the second time it is recommended to polish after 8h. The lacquer film completely absorbs its properties after 24 hours (at 23°C and 50% moisture). Output 10-15 m2/l. Minimum working temperature + 8°C. Thinner – water.

Atsauksmes

0.0 no 5 zvaigznēm (Kopā 0 vērtējumi)

5★
4★
3★
2★
1★
Master Team Master Team Lacquer Inside Gloss 3l Preces apraksts angļu valodā:







It is intended for wooden walls, ceiling tiles, plywood, OSB panels, wooden and wicker products. Suitable for varnishing mineral surfaces (bricks, concrete, plaster). Designed for interior work. The dry film is clear, strong, resistant to frosts, cold and heat. Contains no organic solvents!

Varnishing Stir well before lacquering! The varnish can be applied manually, by brush, by roller or by spraying. It is recommended to lacquer 2 to 3 layers. Drying time – up to 2 hours at + 23°C. For the second time it is recommended to polish after 8h. The lacquer film completely absorbs its properties after 24 hours (at 23°C and 50% moisture). Output 10-15 m2/l. Minimum working temperature + 8°C. Thinner – water.
000051340866 14.50
Uzdot jautājumu

captcha
Uz augšu