Visas kategorijas
2450

Saņem 07.02.

Ielikt grozā Daudzums:

Piegādes veidi:

SELF_DELIVERY Saņem 1a.lv klientu centrā
07.02.2020
PICKUP Saņem piegādes punktos
08.02.2020
ADDRESS Saņem piegādi uz adresi
10.02.2020

Preces galvenie parametri:

  • Tips: Gaisa dzese
  • Pielietojums: Korpusam (120 mm)
Vairāk par šo preci
DĀVANA:

Saliksim datoru BEZ MAKSAS, ja izvēlētās komponentes veido darbam pilnvērtīgu datoru!

Bezmaksas piegāde uz "K-Senukai"!

Bezmaksas piegāde 1A klientu centrā!

Godīga atbilde Jūsu
vajadzībai

Detalizēta informācija

Ražotājs Lamptron
Tips Gaisa dzese
Pielietojums

Dzesētājam ir vairāki pielietojuma veidi - procesoram, videokartei, korpusam, u.c.

Korpusam (120 mm)
Socket atbalsts

Šis parametrs apzīmē to, vai dotais dzesētājs paredzēts attiecīgajai procesora ligzdai.

Nav informācijas
Īpašas atzīmes Izmēri: 120 × 120 × 25 mm (G × P × A)
Krāsa: melna (korpuss) / caurspīdīga (ventilatora lāpstiņas)
Gaisa caurplūsma: 21 - 148 m³ / h
Statiskais spiediens: 0.37-1.98 mmH2O
Ātrums: 600 - 1400 apgr./min
Trokšņa līmenis: 17 - 29 dB (A)
Gultnis: hidrauliskais
Kabeļa garums: 650 mm
Savienotāji:
3-pin / 4-pin Molex (jauda)
12V 4-pin / 5050 pin (RGB)
Mūža ilgums: 150 000 stundas
Kontrolieris:
5x 4-pin RGB savienotājs
3x 3-pin ventilatora savienotājs
Barošanas avots: 4-pin Molex

Preces apraksts

Preces apraksts angļu valodā:The Nova RGB LED fans from Lamptron represent the ideal introduction to the world of RGB LED fans. The Nova fan shines with two LED rings for impressive lighting. The performance data of the fans can also be seen. Thanks to the 4-pin or the 5050 connector for RGB lighting and the 3-pin or 4-pin Molex connector for the power supply, they can be easily connected to almost all current motherboards. In this kit with three fans is also a controller (CFM36 V1.0)for a PCI slot where all three fans and their RGB LEDs can be connected. The speed of the fan can be controlled via a rotary control, and there is also a remote control for the lighting.


The features of the Lamptron Nova RGB LED fans in a 3-pack at a glance:

  • RGB LED fan with 12V 4-pin RGB and 3-pin power supply
  • 600 to 1,400 rpm at 17 to 29 dB (A)
  • Up to 1.98 mmH2O air pressure, up to 148 m³ / h volume flow
  • Hydraulic bearing for a quiet and long running time, up to 150,000 hours
  • Controller for the PCI slot with 3x 3-pin fan connector, 5x 4-pin RGB connector, including remote control


The features of the Lamptron Nova RGB LED fan in detail

The Lamptron 120mm fan is designed for efficient and quiet operation. The special design of the rotor blades ensures an optimal but quiet airflow, since air turbulences are largely reduced. As a result, proper cooling is achieved even at low speeds. The Nova fan has a noise level of only 29 dB (A) at a maximum speed of 1,400 rpm, consuming less than 0.3 watts. The hydraulic bearings also reduce the noise. At the same time, it ensures a long service life of up to 150,000 hours

The fan is also equipped with RGB LEDs. They are connected to the motherboard via a 12V 4-pin or 5050-pin connector. The cable length of the fan is 65 centimeters .

Atsauksmes

0.0 no 5 zvaigznēm (Kopā 0 vērtējumi)

5★
4★
3★
2★
1★
Lamptron Lamptron Fan RGB LED 120mm Set Nova Dual Ring Preces apraksts angļu valodā:The Nova RGB LED fans from Lamptron represent the ideal introduction to the world of RGB LED fans. The Nova fan shines with two LED rings for impressive lighting. The performance data of the fans can also be seen. Thanks to the 4-pin or the 5050 connector for RGB lighting and the 3-pin or 4-pin Molex connector for the power supply, they can be easily connected to almost all current motherboards. In this kit with three fans is also a controller (CFM36 V1.0)for a PCI slot where all three fans and their RGB LEDs can be connected. The speed of the fan can be controlled via a rotary control, and there is also a remote control for the lighting.


The features of the Lamptron Nova RGB LED fans in a 3-pack at a glance:

  • RGB LED fan with 12V 4-pin RGB and 3-pin power supply
  • 600 to 1,400 rpm at 17 to 29 dB (A)
  • Up to 1.98 mmH2O air pressure, up to 148 m³ / h volume flow
  • Hydraulic bearing for a quiet and long running time, up to 150,000 hours
  • Controller for the PCI slot with 3x 3-pin fan connector, 5x 4-pin RGB connector, including remote control


The features of the Lamptron Nova RGB LED fan in detail

The Lamptron 120mm fan is designed for efficient and quiet operation. The special design of the rotor blades ensures an optimal but quiet airflow, since air turbulences are largely reduced. As a result, proper cooling is achieved even at low speeds. The Nova fan has a noise level of only 29 dB (A) at a maximum speed of 1,400 rpm, consuming less than 0.3 watts. The hydraulic bearings also reduce the noise. At the same time, it ensures a long service life of up to 150,000 hours

The fan is also equipped with RGB LEDs. They are connected to the motherboard via a 12V 4-pin or 5050-pin connector. The cable length of the fan is 65 centimeters .
LAMP-NOVA12254 24.50
Uzdot jautājumu

captcha
Uz augšu