Visas kategorijas
11398

Lūdzam ņemt vērā, ka ar šo kalkulatoru veiktajiem aprēķiniem ir informatīva nozīme. Ikmēneša maksājums var mainīties atkarībā no izvēlētā līzinga kompānijas piedāvājuma, procentu likmes izmaiņām un iesnieguma izskatīšanas.

Juridiskām personām: 94.20 €

Juridiskajām personām, kas ir PVN maksātāji un veicot apmaksu pārskaitījuma veidā, 1A pārdos šo preci bez PVN (PVN likuma 143. pants - īpašais nodokļa piemērošanas režīms)

Saņem 13.08.

Ielikt grozā Daudzums:

Piegādes veidi:

SELF_DELIVERY Saņem 1a.lv klientu centrā
13.08.2019
PICKUP Saņem piegādes punktos
13.08.2019
ADDRESS Saņem piegādi uz adresi
13.08.2019

Preces galvenie parametri:

  • Korpusa tips: ATX
  • Barošanas bloks: Nav
  • Krāsa: Melna
  • 5.25" Drive Bays: 3
  • 3.5" Drive Bays: 4
  • 3.5" FDD Drive Bays: Nav
Vairāk par šo preci
DĀVANA:

ĪSTS 0% LĪZINGS! Pirmā iemaksa 0%, komisija par līguma noslēgšanu 0 EUR, aizņēmuma likme 0%, gada procentu likme 0%. Piedāvājums spēkā līzinga termiņam uz 3 mēnešiem!

Izvēlies datoru komponentes, mēs datoru saliksim BEZ MAKSAS!!!

Bezmaksas piegāde uz "K-Senukai"!

Līzinga kalkulators:

Ikmēneša maksājums : 5.54
Pasūtījumiem, kuru summa pārsniedz 1400 EUR, ir obligāta pirmā iemaksa vismaz 10% apmērā no pirkuma summas.

Detalizēta informācija

KOPĒJIE PARAMETRI
Ražotājs Cooltek
Korpusa tips

Norāda mātesplates formfaktora izmēra standartu.

ATX
Barošanas bloks

Barošanas bloks nodrošina datoru un tā komponentes ar līdzstrāvu.

Nav
Korpusa materiāls Metāls
Plastmasa
Krāsa Melna
PAPLAŠINĀJUMU IESPĒJAS
5.25" Drive Bays

Drive Bays ir vieta, kur datora korpusam pievienot aparatūru.

Mūsdienās visbiežāk tiek izmantoti četri veidi Drive Bays formfaktori (izmērs)- 5.25 ", 3.5", 2.5" vai 1.8".

3
3.5" Drive Bays

Drive Bays ir vieta, kur datora korpusam pievienot aparatūru.

Mūsdienās visbiežāk tiek izmantoti četri veidi Drive Bays formfaktori (izmērs)- 5.25 ", 3.5", 2.5" vai 1.8".

4
3.5" FDD Drive Bays

Drive Bays ir vieta, kur datora korpusam pievienot aparatūru.

Mūsdienās visbiežāk tiek izmantoti četri veidi Drive Bays formfaktori (izmērs)- 5.25 ", 3.5", 2.5" vai 1.8".

Nav
PRIEKŠĒJĀ PANEĻA PIESLĒGUMI
Priekšējā paneļa interfeiss

Interfeiss ir līdzekļu un noteikumu kopa, kura nodrošina cilvēka, programmas un aparatūras savstarpējo mijiedarbību.

1 x Audio In
1 x Audio Out
2 x USB 3.0
IZMĒRI UN SVARS
Izmēri 445 x 195 x 500 mm
Svars (kg) 8
PAPILDUS
Īpašas atzīmes 3 x 5.25" external
4 x 3.5" internal
4 x 2.5" internal

Preces apraksts

Preces apraksts angļu valodā:




With the "Antiphon" we add a fully noise insulated mid-tower to our product range, designed especially for demanding users.

The Antiphon offers particularly comprehensive equipment with practical detailed solutions that is unrivaled in this price segment. The case has been designed especially for fans of extremely silent PC-systems. The Antiphon is lined with a total of 1.35 kg of special noise absorbing material. In conjunction with the soundproof doors, the decoupled mounting of hard drives and power supply, the use of special anti-vibration case feet, as well as a built-in fan controller the case provides a noise insulation that allows almost no noise to reach the outside of the case.

The front panel is dominated by the massive front door, which is equipped with an anode wiredrawing aluminum plate. Three 5.25 inch drive bays are located in the upper part of the front behind the door. The lower area is home to a dust filer, which can be removed and cleaned easily. Behind the dust filer rotate two 120 mm fans for optimal ventilation of the case. At the bottom of the front panel you can find the fan controller - the I/O panel with 2 x USB 3.0 as well as the mandatory audio jacks is located on top of the case.

The interior of the Antiphon is convincing all around. Two HDD cages are available: The bottom can be equipped with four 3.5 inch HDD; the upper cage holds four 2.5 inch HDD/SSD. A simple, yet brilliant rail system makes installation a breeze. Simply attach the support rails to the hard disk drive which you would like to mount, and push it together with the rails into the corresponding bay. Thanks to the integrated decoupling, vibrations are largely absorbed.

The ventilation system of our Antiphon is designed to provide the best possible cooling performance at a minimum noise emission. Three silent 120 mm fans are already included; besides the already mentioned fans in the front, another is attached in the back. Silent air intakes ensure enough fresh air is fed into the case interior, even with the front door closed. The PCI slot covers are perforated for very efficient case ventilation. Another 120 mm fan can be mounted on the bottom.

Dust filters in the front and under the bottom prevent dust particles to be sucked in into the interior of the case. The Antiphon is equipped with a 2-speed fan controller for up to 3 fans, positioned at the bottom of the front panel. You can choose between two stages: “High” for maximum case ventilation and “Low” for exceptionally smooth operation of the fan. If necessary, the fans can also be switched off.

The Antiphon offers rubberized cable guides at strategic positions in the motherboard tray to allow a tidy case interior as possible. This way, interfering cables can be placed behind the motherboard tray very easily. The power supply is mounted at the bottom of the Antiphon; appropriate air intakes with dust filters are provided to allow the intake of fresh air from the outside.

Atsauksmes

0.0 no 5 zvaigznēm (Kopā 0 vērtējumi)

5★
4★
3★
2★
1★
Cooltek Cooltek Antiphon Black Preces apraksts angļu valodā:




With the "Antiphon" we add a fully noise insulated mid-tower to our product range, designed especially for demanding users.

The Antiphon offers particularly comprehensive equipment with practical detailed solutions that is unrivaled in this price segment. The case has been designed especially for fans of extremely silent PC-systems. The Antiphon is lined with a total of 1.35 kg of special noise absorbing material. In conjunction with the soundproof doors, the decoupled mounting of hard drives and power supply, the use of special anti-vibration case feet, as well as a built-in fan controller the case provides a noise insulation that allows almost no noise to reach the outside of the case.

The front panel is dominated by the massive front door, which is equipped with an anode wiredrawing aluminum plate. Three 5.25 inch drive bays are located in the upper part of the front behind the door. The lower area is home to a dust filer, which can be removed and cleaned easily. Behind the dust filer rotate two 120 mm fans for optimal ventilation of the case. At the bottom of the front panel you can find the fan controller - the I/O panel with 2 x USB 3.0 as well as the mandatory audio jacks is located on top of the case.

The interior of the Antiphon is convincing all around. Two HDD cages are available: The bottom can be equipped with four 3.5 inch HDD; the upper cage holds four 2.5 inch HDD/SSD. A simple, yet brilliant rail system makes installation a breeze. Simply attach the support rails to the hard disk drive which you would like to mount, and push it together with the rails into the corresponding bay. Thanks to the integrated decoupling, vibrations are largely absorbed.

The ventilation system of our Antiphon is designed to provide the best possible cooling performance at a minimum noise emission. Three silent 120 mm fans are already included; besides the already mentioned fans in the front, another is attached in the back. Silent air intakes ensure enough fresh air is fed into the case interior, even with the front door closed. The PCI slot covers are perforated for very efficient case ventilation. Another 120 mm fan can be mounted on the bottom.

Dust filters in the front and under the bottom prevent dust particles to be sucked in into the interior of the case. The Antiphon is equipped with a 2-speed fan controller for up to 3 fans, positioned at the bottom of the front panel. You can choose between two stages: “High” for maximum case ventilation and “Low” for exceptionally smooth operation of the fan. If necessary, the fans can also be switched off.

The Antiphon offers rubberized cable guides at strategic positions in the motherboard tray to allow a tidy case interior as possible. This way, interfering cables can be placed behind the motherboard tray very easily. The power supply is mounted at the bottom of the Antiphon; appropriate air intakes with dust filters are provided to allow the intake of fresh air from the outside.
600045760 113.98
Uzdot jautājumu

captcha
Uz augšu