Overheated computers, loud fans, unexpected shutdown and short hardware life. All these problems and many more can occur in completely dusty and dirty computer systems. To counteract this, it makes sense to use dust filters and to protect its precious equipment. Especially with the reliable dust filters from Dustend , the computer can be kept clean for several years, because the filters can be cut to size and are also reusable and washable.
The Dustend G3 dust filter at a glance:
- Black dust filter with high filter efficiency of 90%
- Made of polyurethane
- Cuttable & Reusable
- Sound-absorbing effect
The Dustend G3 dust filter is a true filter monster , because its high-quality polyurethane material with an open cell structure filters large and tiny particles of up to five microns. The filter efficiency is therefore as much as 90% and the dust pickup at 220 g / m². This makes the G3 filter particularly interesting for PCs, which should remain as dust-free as possible.
Advantages of a reliable dust filter
Other advantages of a dusting Dustend filter are the low air resistance, which is specified in the G3 with 24 Pa and the nice side effect of a noise reduction. In addition, the filters are reusable and washable, allowing them to stay in service for a long time.
The flexible Dustend dust filters can be used in many places. In addition to the main purpose within computer cases, they are also ideal for dust protection for consoles such as PS3, PS4, Xbox 360 and Xbox One use. Since these devices are usually very difficult to disassemble and clean, it makes perfect sense to install a dust filter directly after purchase. Another place of use would be, for example, the car, which is also equipped with board computers today, but in contrast to the ventilation of the interior is not equipped with filters. Even with air conditioning systems and beamer life expectancy can be extended enormously by a dust filter.
Location and installation of Dustend dust filters
The 950 x 155 mm dust filter can be perfectly cut to the desired size and mounted very easily. All you need to do is to make out the parts of the case where air is drawn in and cut the filter to the appropriate size. Since the filter has an adhesive side, it can be easily pressed and mounted from the inside or outside. It should be noted that the surface to be covered is clean and as smooth as possible. For optimum durability, the filter should be pressed firmly.