Visas kategorijas
390

Saņem 02.11.

Ielikt grozā Daudzums:

Piegādes veidi:

SELF_DELIVERY Saņem 1a.lv klientu centrā
02.11.2018
PICKUP Saņem piegādes punktos
02.11.2018
ADDRESS Saņem piegādi uz adresi
02.11.2018

Preces galvenie parametri:

  • Preces tips: Termoblīves
Vairāk par šo preci
DĀVANA:

Izvēlies datoru komponentes, mēs datoru saliksim BEZ MAKSAS!!!

Mazāka % likme

Credit24 Kredītlīnijas gada procentu likme ir no 51,98%. GPL aprēķins ir balstīts uz pieņēmumu, ka līguma sākumā tiek izņemts maksimālais Kredītlīnijas limits, kas tiek atmaksāts vienādos maksājumos 12 mēnešu laikā. GPL aprēķins ir balstīts uz visām ar produktu saistītajām procentu likmēm un ietver Komisiju par konta apkalpošanu un naudas līdzekļu izmaksu. Credit24 produktu minimālā GPL likme ir 51,98% / maksimālā GPL likme ir 218,87%. Credit24 piedāvā aizdevumus no 50 līdz 4000 € uz termiņu no 3 līdz 36 mēnešiem.


Mazāka apmaksas summa!
Sākot no:
 €
 €
Spied šeit - būs ātrāk!

Detalizēta informācija

Preces tips Termoblīves
Ražotājs EK Water Blocks
Specifikācija Dimensions (total): 100 × 16 mm (L x W)
Dimensions: (single): 12.5 x 16 mm (L x W)
Thickness: 1.5 mm
Number: 1 strip (pre-cut into eight smaller pieces)
Thermal conductivity: 3.5 W / (m · K)
Operating temperature: -55 to +200 ° C

Preces apraksts

EK Water Blocks Thermal Pad E 1,5mm
Preces apraksts angļu valodā:


Thermal Pads are a real alternative to traditional thermal grease for many applications. The Thermal Pads offer some advantages over liquid or viscous materials. This makes it easy to cut the pads themselves to the required size, eliminating the uncertainty of applying paste or smearing during smoothing. The EK Water Blocks pad offered here is already pre-cut into eight smaller pieces, slightly self-adhesive, and usually initially holds itself in the previously assigned position.

Of course, the fixation in the further course of assembly can not be completely dispensed with, since heat source, thermal pad and heatsink (or the heat delivery surface) should come into contact with as large a surface area as possible in order to ensure optimum heat transfer. Here, too, EKWB offers maximum support to the user, as the 100 x 16 mm blue pad is available in several thicknesses, with the version offered here being 1.5 mm thick. In addition, the material is pleasantly flexible and adaptable, which makes it useful in many places.

To mention just a few application examples: in RAM water coolers, alternative graphics card coolers, chipset coolers and many other components, where it is important to effectively dissipate waste heat (eg on cooling fins, heatpipes, radiators, heatsinks, etc.). Since the EKWB heat-conducting pads do not conduct electricity, there are virtually no limits to the imagination of most electronic components. On the other hand, the pads with a high thermal conductivity of 3.5 W / (m · K) make some thermal grease look old. The pads here are ideally suited for the chip sets of a memory module, since the strip, which measures 100 x 16 mm in total, has already been cut into eight smaller pieces of 12.5 x 16 mm each. 

Note:The application is at your own risk! Caseking assumes no liability for damage caused by improper use or use in unsuitable fields of application. A sufficiently high heat transfer should be carefully checked after installation! 

Technical details:
  • Dimensions (total): 100 × 16 mm (L x W)
  • Dimensions: (single): 12.5 x 16 mm (L x W)
  • Thickness: 1.5 mm
  • Number: 1 strip (pre-cut into eight smaller pieces)
  • Thermal conductivity: 3.5 W / (m · K)
  • Operating temperature: -55 to +200 ° C


Atsauksmes

0.0 no 5 zvaigznēm (Kopā 0 vērtējumi)

5★
4★
3★
2★
1★
EK Water Blocks EK Water Blocks Thermal Pad E 1.5mm EK Water Blocks Thermal Pad E 1,5mm
Preces apraksts angļu valodā:


Thermal Pads are a real alternative to traditional thermal grease for many applications. The Thermal Pads offer some advantages over liquid or viscous materials. This makes it easy to cut the pads themselves to the required size, eliminating the uncertainty of applying paste or smearing during smoothing. The EK Water Blocks pad offered here is already pre-cut into eight smaller pieces, slightly self-adhesive, and usually initially holds itself in the previously assigned position.

Of course, the fixation in the further course of assembly can not be completely dispensed with, since heat source, thermal pad and heatsink (or the heat delivery surface) should come into contact with as large a surface area as possible in order to ensure optimum heat transfer. Here, too, EKWB offers maximum support to the user, as the 100 x 16 mm blue pad is available in several thicknesses, with the version offered here being 1.5 mm thick. In addition, the material is pleasantly flexible and adaptable, which makes it useful in many places.

To mention just a few application examples: in RAM water coolers, alternative graphics card coolers, chipset coolers and many other components, where it is important to effectively dissipate waste heat (eg on cooling fins, heatpipes, radiators, heatsinks, etc.). Since the EKWB heat-conducting pads do not conduct electricity, there are virtually no limits to the imagination of most electronic components. On the other hand, the pads with a high thermal conductivity of 3.5 W / (m · K) make some thermal grease look old. The pads here are ideally suited for the chip sets of a memory module, since the strip, which measures 100 x 16 mm in total, has already been cut into eight smaller pieces of 12.5 x 16 mm each. 

Note:The application is at your own risk! Caseking assumes no liability for damage caused by improper use or use in unsuitable fields of application. A sufficiently high heat transfer should be carefully checked after installation! 

Technical details:
  • Dimensions (total): 100 × 16 mm (L x W)
  • Dimensions: (single): 12.5 x 16 mm (L x W)
  • Thickness: 1.5 mm
  • Number: 1 strip (pre-cut into eight smaller pieces)
  • Thermal conductivity: 3.5 W / (m · K)
  • Operating temperature: -55 to +200 ° C


3830046996701 5 0.5 3.90
Uzdot jautājumu

captcha
Uz augšu