Visas kategorijas
9853

Juridiskām personām: 81.43 €

Juridiskajām personām, kas ir PVN maksātāji un veicot apmaksu pārskaitījuma veidā, 1A pārdos šo preci bez PVN (PVN likuma 143. pants - īpašais nodokļa piemērošanas režīms)

Saņem 01.01.

Ielikt grozā Daudzums:

Piegādes veidi:

SELF_DELIVERY Saņem 1a.lv klientu centrā
01.01.2020
PICKUP Saņem piegādes punktos
02.01.2020
ADDRESS Saņem piegādi uz adresi
02.01.2020

Preces galvenie parametri:

  • Preces tips: Ūdens bloki
  • Pielietojums: Procesoram
Vairāk par šo preci
DĀVANA:

Saliksim datoru BEZ MAKSAS, ja izvēlētās komponentes veido darbam pilnvērtīgu datoru!

Bezmaksas piegāde uz "K-Senukai"!

Bezmaksas piegāde 1A klientu centrā!

Individuāls serviss.
Personīga pieeja.

Līzinga kalkulators:

Ikmēneša maksājums : 4.94
Pasūtījumiem, kuru summa pārsniedz 1400 EUR, ir obligāta pirmā iemaksa vismaz 10% apmērā no pirkuma summas.

Detalizēta informācija

Ražotājs EK Water Blocks
Preces tips Ūdens bloki
Pielietojums Procesoram
Specifikācija Materiāls: niķelēts varš (apakša), akrila stikls (vāks)
Savienojumi: 2x G1 / 4-vītne
RGB LED saderība:
ASUS Aura Sync
Gigabyte RGB Fusion
MSI Mystic Light ASRock Polychrome Sync
Termiskais savienojums: Thermal Grizzly Hydronaut (EKWB 1.0 g)
Socket:
Intel LGA 1150
Intel LGA 1151
Intel LGA 1155
Intel LGA 1156
Intel LGA 2066
Intel LGA 2011-V3

Preces apraksts

Preces apraksts angļu valodā:

EK-Velocity is the new high-performance flagship premium quality CPU water block for modern Intel processors. It features a fresh design that will enable a vast number of variations and options for enthusiasts and demanding users as well!


EK Quantum - Design & Performance 


Velocity series water blocks are part of the EK QuantumProduct Line combining an elegant new design and our award-winning, high-performance cooling engine. For those who want to stand out!  


For more information, check out: www.ekwb.com/quantum

Details


EK-Velocity is the new high-performance flagship premium quality CPU water block for modern Intel processors. It features a fresh design that will enable a vast number of variations and options for enthusiasts and demanding users as well!


EK® Velocity series CPU water blocks embed the 5th generation of the award-winning EK® CPU water block cooling engine, further tweaked for performance and optimal coolant flow! Low hydraulic flow restriction enables this product to be used in setups using weaker water pumps or lower pump speeds for added silent operation, while still achieving top performance! The water block also comes with the most sophisticated RGB lightning implementation on the market to this day. A total of 24 LEDs are housed under the aesthetic shroud which connects to a standard 4-pin 12V RGB header.


EK-Velocity RGB intel nickel acetal


The purest copper available on the market is used for the EK-Velocity cold plate which is precisely machined to a dense micro-fin structure. The contact surface itself is machine polished for a better contact with the CPU IHS. This version of the water block features a nickel-plated copper cold plate with a CNC machined high-quality black POM acetal top piece.


The new cooling engine is characterized by the top-integrated jet nozzle which is combined with a thicker jet plate allowing a more precise bow control. The simplified water block structure offers a more optimized coolant flow and easier maintenance, while the interchangeable thick jet plate ensures the best contact surface for mainstream and HEDT Intel platforms.


The block is equipped with a reinforced hold-down bracket, and the enclosed mounting kit includes all the necessary mounting screws, mounting springs, an Intel 115x backplate, rubber backplate gasket and a small tube of Thermal Grizzly Hydronaut high-performance thermal paste. The EK-Velocity CPU water block features a universal mounting mechanism that offers error-preventing, tool-less installation supporting Intel LGA-115x and LGA-20xx sockets out of the box. The mounting screws are streamlined and are even smaller than before for an added aesthetical perfection.


Velocity RGB Compatibility


This product is compatible with all popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header.


Technical specifications:

- RGB cable length: 30cm
- RGB connector classic 4-pin (12+ G R B)


CPU socket compatibility:

- Intel LGA-1150/1151/1155/1156
- Intel LGA-2011(-3)
- Intel LGA-2066

 
Made in Slovenia - Europe!


PLEASE NOTE:

  • The built-in 4-pin LED is compatible with any standard 12V LED RGB controller.
  • This product should NOT be installed with any aluminum EK Fluid Gaming parts!

This product is delivered without the necessary connections. These must therefore be purchased separately. 

Attention:
 Please note that some coolers come with a protective foil on the bottom. This must always be removed before installation and commissioning. We assume no liability for damage due to incorrect or incorrect installation and improper use!

Atsauksmes

0.0 no 5 zvaigznēm (Kopā 0 vērtējumi)

5★
4★
3★
2★
1★
EK Water Blocks EK Water Blocks CPU Water Block EK-Velocity Intel RGB Nickel/Acetal Preces apraksts angļu valodā:

EK-Velocity is the new high-performance flagship premium quality CPU water block for modern Intel processors. It features a fresh design that will enable a vast number of variations and options for enthusiasts and demanding users as well!


EK Quantum - Design & Performance 


Velocity series water blocks are part of the EK QuantumProduct Line combining an elegant new design and our award-winning, high-performance cooling engine. For those who want to stand out!  


For more information, check out: www.ekwb.com/quantum

Details


EK-Velocity is the new high-performance flagship premium quality CPU water block for modern Intel processors. It features a fresh design that will enable a vast number of variations and options for enthusiasts and demanding users as well!


EK® Velocity series CPU water blocks embed the 5th generation of the award-winning EK® CPU water block cooling engine, further tweaked for performance and optimal coolant flow! Low hydraulic flow restriction enables this product to be used in setups using weaker water pumps or lower pump speeds for added silent operation, while still achieving top performance! The water block also comes with the most sophisticated RGB lightning implementation on the market to this day. A total of 24 LEDs are housed under the aesthetic shroud which connects to a standard 4-pin 12V RGB header.


EK-Velocity RGB intel nickel acetal


The purest copper available on the market is used for the EK-Velocity cold plate which is precisely machined to a dense micro-fin structure. The contact surface itself is machine polished for a better contact with the CPU IHS. This version of the water block features a nickel-plated copper cold plate with a CNC machined high-quality black POM acetal top piece.


The new cooling engine is characterized by the top-integrated jet nozzle which is combined with a thicker jet plate allowing a more precise bow control. The simplified water block structure offers a more optimized coolant flow and easier maintenance, while the interchangeable thick jet plate ensures the best contact surface for mainstream and HEDT Intel platforms.


The block is equipped with a reinforced hold-down bracket, and the enclosed mounting kit includes all the necessary mounting screws, mounting springs, an Intel 115x backplate, rubber backplate gasket and a small tube of Thermal Grizzly Hydronaut high-performance thermal paste. The EK-Velocity CPU water block features a universal mounting mechanism that offers error-preventing, tool-less installation supporting Intel LGA-115x and LGA-20xx sockets out of the box. The mounting screws are streamlined and are even smaller than before for an added aesthetical perfection.


Velocity RGB Compatibility


This product is compatible with all popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header.


Technical specifications:

- RGB cable length: 30cm
- RGB connector classic 4-pin (12+ G R B)


CPU socket compatibility:

- Intel LGA-1150/1151/1155/1156
- Intel LGA-2011(-3)
- Intel LGA-2066

 
Made in Slovenia - Europe!


PLEASE NOTE:

  • The built-in 4-pin LED is compatible with any standard 12V LED RGB controller.
  • This product should NOT be installed with any aluminum EK Fluid Gaming parts!

This product is delivered without the necessary connections. These must therefore be purchased separately. 

Attention:
 Please note that some coolers come with a protective foil on the bottom. This must always be removed before installation and commissioning. We assume no liability for damage due to incorrect or incorrect installation and improper use!

3831109810200 98.53
Uzdot jautājumu

captcha
Uz augšu