Preces apraksts angļu valodā:
FIBARO Motion Sensor is a HomeKit-enabled multi-sensor using Bluetooth® low energy wireless technology. Along with detecting motion, the accessory measures temperature and light intensity. Built-in accelerometer detects tampering with the accessory. Every time the movement is detected, Motion Sensor will glow in different colour depending on the temperature.
The Motion Sensor detects movement using PIR sensor and reports it to your iOS device. Blink of LED indicates detected motion. Color of blink is dependent on current ambient temperature (smooth transition through blue, green and red). Brightness of blink is adjusted by measured light intensity. NOTE: Use app that allows to configure parameters to adjust sensitivity, sustain time and LED indication for motion detection.
The Motion Sensor detects tampering when accessory is moved and reports it to your iOS device. Tampering is indicated with an alternate blinking in red, blue and white. NOTE: Use app that allows to configure parameters to adjust sensitivity and indications for tamper detection.
The Motion Sensor measures ambient temperature every 5 minutes. If the measured temperature differs from previously reported by at least 2°C (3.6°F), accessory reports it to your iOS device. NOTE: The accessory measures temperature in the place of installation. Remember that temperature near the ceiling may differ from that on eye-level or the floor.
Battery level measuring
The Motion Sensor measures battery level every 24 hours and reports it to your iOS device. Additionally, if battery level is below 15%, the accessory will report low level battery status to your iOS device.
Light intensity measuring
The Motion Sensor measures light intensity. If the measured light intensity differs from previously reported by at least 200 lux, accessory reports it to your iOS device. NOTE: The accessory measures light intensity in the place of installation, not where the sensor is pointed.