Все категории
886

! На складе последние 1 шт.!

В корзину Кол - во:

Варианты доставки:

SELF_DELIVERY Получи в клиентском центре 1a.lv
28.08.2019
PICKUP В пунктах доставки
28.08.2019
ADDRESS C доставкой на адрес
28.08.2019

Главные параметры товара:

  • Тип товара: Термопрокладки
Больше об этом товаре
В ПОДАРОК:

Соберём компьютер БЕСПЛАТНО, если выбранные комплектующие составляют полноценно работающий компьютер!

Бесплатная доставка в "K-Senukai"!

Бесплатная доставка Экспресс-почтой в Circle-K!

Бесплатная доставка Экспресс-почтой в Почту Латвии!

ПОДРОБНАЯ ИНФОРМАЦИЯ

Тип товара Термопрокладки
Производитель EK Water Blocks
Спецификация Dimensions (total): 100 × 16 mm (L x W)
Dimensions: (single): 12.5 x 16 mm (L x W)
Thickness: 1.5 mm
Number: 1 strip (pre-cut into eight smaller pieces)
Thermal conductivity: 3.5 W / (m · K)
Operating temperature: -55 to +200 ° C

Описание модели

EK Water Blocks Thermal Pad E 1,5mm
Описание на английском языке:


Thermal Pads are a real alternative to traditional thermal grease for many applications. The Thermal Pads offer some advantages over liquid or viscous materials. This makes it easy to cut the pads themselves to the required size, eliminating the uncertainty of applying paste or smearing during smoothing. The EK Water Blocks pad offered here is already pre-cut into eight smaller pieces, slightly self-adhesive, and usually initially holds itself in the previously assigned position.

Of course, the fixation in the further course of assembly can not be completely dispensed with, since heat source, thermal pad and heatsink (or the heat delivery surface) should come into contact with as large a surface area as possible in order to ensure optimum heat transfer. Here, too, EKWB offers maximum support to the user, as the 100 x 16 mm blue pad is available in several thicknesses, with the version offered here being 1.5 mm thick. In addition, the material is pleasantly flexible and adaptable, which makes it useful in many places.

To mention just a few application examples: in RAM water coolers, alternative graphics card coolers, chipset coolers and many other components, where it is important to effectively dissipate waste heat (eg on cooling fins, heatpipes, radiators, heatsinks, etc.). Since the EKWB heat-conducting pads do not conduct electricity, there are virtually no limits to the imagination of most electronic components. On the other hand, the pads with a high thermal conductivity of 3.5 W / (m · K) make some thermal grease look old. The pads here are ideally suited for the chip sets of a memory module, since the strip, which measures 100 x 16 mm in total, has already been cut into eight smaller pieces of 12.5 x 16 mm each. 

Note:The application is at your own risk! Caseking assumes no liability for damage caused by improper use or use in unsuitable fields of application. A sufficiently high heat transfer should be carefully checked after installation! 

Technical details:
  • Dimensions (total): 100 × 16 mm (L x W)
  • Dimensions: (single): 12.5 x 16 mm (L x W)
  • Thickness: 1.5 mm
  • Number: 1 strip (pre-cut into eight smaller pieces)
  • Thermal conductivity: 3.5 W / (m · K)
  • Operating temperature: -55 to +200 ° C



Отзывы

0.0 из 5 звездочек (Всего 0 оценок)

5★
4★
3★
2★
1★
EK Water Blocks EK Water Blocks Thermal Pad E 1.5mm EK Water Blocks Thermal Pad E 1,5mm
Описание на английском языке:


Thermal Pads are a real alternative to traditional thermal grease for many applications. The Thermal Pads offer some advantages over liquid or viscous materials. This makes it easy to cut the pads themselves to the required size, eliminating the uncertainty of applying paste or smearing during smoothing. The EK Water Blocks pad offered here is already pre-cut into eight smaller pieces, slightly self-adhesive, and usually initially holds itself in the previously assigned position.

Of course, the fixation in the further course of assembly can not be completely dispensed with, since heat source, thermal pad and heatsink (or the heat delivery surface) should come into contact with as large a surface area as possible in order to ensure optimum heat transfer. Here, too, EKWB offers maximum support to the user, as the 100 x 16 mm blue pad is available in several thicknesses, with the version offered here being 1.5 mm thick. In addition, the material is pleasantly flexible and adaptable, which makes it useful in many places.

To mention just a few application examples: in RAM water coolers, alternative graphics card coolers, chipset coolers and many other components, where it is important to effectively dissipate waste heat (eg on cooling fins, heatpipes, radiators, heatsinks, etc.). Since the EKWB heat-conducting pads do not conduct electricity, there are virtually no limits to the imagination of most electronic components. On the other hand, the pads with a high thermal conductivity of 3.5 W / (m · K) make some thermal grease look old. The pads here are ideally suited for the chip sets of a memory module, since the strip, which measures 100 x 16 mm in total, has already been cut into eight smaller pieces of 12.5 x 16 mm each. 

Note:The application is at your own risk! Caseking assumes no liability for damage caused by improper use or use in unsuitable fields of application. A sufficiently high heat transfer should be carefully checked after installation! 

Technical details:
  • Dimensions (total): 100 × 16 mm (L x W)
  • Dimensions: (single): 12.5 x 16 mm (L x W)
  • Thickness: 1.5 mm
  • Number: 1 strip (pre-cut into eight smaller pieces)
  • Thermal conductivity: 3.5 W / (m · K)
  • Operating temperature: -55 to +200 ° C



3830046996701 8.86
Задать вопрос

captcha
Bверх