Все категории
1620

Для юридических лиц: 13.39 €

Юридическим персонам, являющимся плательщиками PVN и оплачивая перечислением, 1А продаст этот товар без PVN (143 статья закона о PVN - особый режим применения налога)

Есть на складе

В корзину Кол - во:

Варианты доставки:

SELF_DELIVERY Получи в клиентском центре 1a.lv
04.10.2018
PICKUP В пунктах доставки
04.10.2018
ADDRESS C доставкой на адрес
04.10.2018

Главные параметры товара:

  • Тип товара: Переходники
  • Применение: Для корпуса
Больше об этом товаре
В ПОДАРОК:

Бесплатная доставкa в пункты получения товаров DPD PICKUP (на товары от 15 EUR и до 9 кг) с кодом "DPD"

Выбери себе желаемые компоненты, компьютер соберём БЕСПЛАТНО!!!

ПОЛУЧИ ТОВАР СРАЗУ,

Минимальная годовая процентная ставка Кредитной линии Credit24 составляет 51,98%. Расчёт ГПС базируется на предположении, что в начале кредитного договора клиент снимает максимальный кредитный лимит и выплачивает его равными частями в течение 12 месяцев. При расчёте ГПС использованы приведённые выше процентные ставки, которые включают в себя комиссию за обслуживание счёта и выплату денежных средств. Credit24 продукт минимальная ГПС 51,98% / максимальная ГПС 218,87%. Credit24 предлагает займы от 50 до 4000 € на срок от 3 до 36 месяцев.


ПЛАТИ ЧЕРЕЗ 30 ДНЕЙ!
НАЧИНАЯ ОТ:
 €
 €
Получить предложение

ПОДРОБНАЯ ИНФОРМАЦИЯ

Производитель BitsPower
Тип товара Переходники
Применение Для корпуса
Спецификация Connections:
1x G1 / 4-inch female thread
1x G1 / 4-inch male thread
Thread length: 5 mm

Описание модели

Описание товара на английском языке:


This Bitspower connection serves as a connector between two Wakü components. The small rotatable helper has a G1 / 4-inch male thread and a G1 / 4-inch female thread. Thanks to its rubber seal, the connection is particularly well protected against leaks. The white finish looks especially cool and will leave a lasting impression on every viewer.


The Bitspower connection G1 / 4 inch AG on G1 / 4 inch IG at a glance:

  • Short turnable connection in white for connecting two Wakü components
  • 1x G1 / 4-inch male thread & 1x G1 / 4-inch female thread
  • Made of high quality brass
  • Easy assembly with hexagon design
  • Sealed by black rubber ring (O-ring)


What is the purpose of a dual G1 / 4-inch connector?

For the connection of individual components of a water cooling, the choice of the correct connections and their sufficient number is essential. If the assembly fails or decelerates due to incorrect or too few connectors, the installation can quickly become a frustrating experience. 

Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. Each version is made of solid brass and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. 

This is a white 2-inch G1 / 4-inch connector with a G1 / 4-inch female thread on one side and a G1 / 4-inch male thread on the other. Due to the rotatability of the connection, it is particularly easy and convenient to install and enables the connection of two Wakü components with corresponding connections. For maximum tightness provides a rubber seal in black. 

Note: The turning function of the connections should always be used in the disassembled state, as this is relatively stiff due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. 

Technical details:
  • Material: brass (connection), rubber (O-ring)
  • Color: white (connection), black (rubber seal)
  • Connections: 
    1x G1 / 4-inch female thread 
    1x G1 / 4-inch male thread
  • Thread length: 5 mm

Отзывы

0.0 из 5 звездочек (Всего 0 оценок)

5★
4★
3★
2★
1★
BitsPower Bitspower Connection Rotatable BP-DWDR-C White Описание товара на английском языке:


This Bitspower connection serves as a connector between two Wakü components. The small rotatable helper has a G1 / 4-inch male thread and a G1 / 4-inch female thread. Thanks to its rubber seal, the connection is particularly well protected against leaks. The white finish looks especially cool and will leave a lasting impression on every viewer.


The Bitspower connection G1 / 4 inch AG on G1 / 4 inch IG at a glance:

  • Short turnable connection in white for connecting two Wakü components
  • 1x G1 / 4-inch male thread & 1x G1 / 4-inch female thread
  • Made of high quality brass
  • Easy assembly with hexagon design
  • Sealed by black rubber ring (O-ring)


What is the purpose of a dual G1 / 4-inch connector?

For the connection of individual components of a water cooling, the choice of the correct connections and their sufficient number is essential. If the assembly fails or decelerates due to incorrect or too few connectors, the installation can quickly become a frustrating experience. 

Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. Each version is made of solid brass and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. 

This is a white 2-inch G1 / 4-inch connector with a G1 / 4-inch female thread on one side and a G1 / 4-inch male thread on the other. Due to the rotatability of the connection, it is particularly easy and convenient to install and enables the connection of two Wakü components with corresponding connections. For maximum tightness provides a rubber seal in black. 

Note: The turning function of the connections should always be used in the disassembled state, as this is relatively stiff due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. 

Technical details:
  • Material: brass (connection), rubber (O-ring)
  • Color: white (connection), black (rubber seal)
  • Connections: 
    1x G1 / 4-inch female thread 
    1x G1 / 4-inch male thread
  • Thread length: 5 mm
BP-DWDR-C 5 0.5 16.20
Задать вопрос

captcha
Bверх