Все категории
39704

Просим обратить внимание,что расчеты, произведенными с данным калькулятором являются информативными. Ежемесячные выплаты могут менятся взависимости от предложения выбранной лизинговой компании,изменения процентной ставки и рассмотрения заявления.

! На складе последние 5 шт.!

В корзину Кол - во:

Варианты доставки:

SELF_DELIVERY Получи в клиентском центре 1a.lv
01.06.2019
ADDRESS C доставкой на адрес
03.06.2019

Главные параметры товара:

  • Тип: Напольные шкафы
  • Количество полок (Rack units): 42U
  • Максимальная нагрузка веса: 400 кг (статическая нагрузка)
Больше об этом товаре
В ПОДАРОК:

НАСТОЯЩИЙ 0% ЛИЗИНГ! Первый взнос 0%, комиссия за оформление договора 0 EUR, ставка по займу 0%, годовая процентная ставка 0%. Предложение в силе на срок действия лизинга 3 месяца!

Бесплатная доставка в "K-Senukai"!

ПОЛУЧИ ТОВАР СРАЗУ,

Минимальная годовая процентная ставка Кредитной линии Credit24 составляет 51,98%. Расчёт ГПС базируется на предположении, что в начале кредитного договора клиент снимает максимальный кредитный лимит и выплачивает его равными частями в течение 12 месяцев. При расчёте ГПС использованы приведённые выше процентные ставки, которые включают в себя комиссию за обслуживание счёта и выплату денежных средств. Credit24 продукт минимальная ГПС 51,98% / максимальная ГПС 218,87%. Credit24 предлагает займы от 50 до 4000 € на срок от 3 до 36 месяцев.


ПЛАТИ ЧЕРЕЗ 30 ДНЕЙ!
НАЧИНАЯ ОТ:
 €
 €
Получить предложение

Лизинговый калькулятор:

Ежемесячный платёж : 16.57

ПОДРОБНАЯ ИНФОРМАЦИЯ

ОБЩИЕ ХАРАКТЕРИСТИКИ
Производитель Triton
Название Triton RMA-42-A66-CAX-A1 42U Free-Standing Cabinet
ТЕХНИЧЕСКИЕ ПАРАМЕТРЫ
Тип Напольные шкафы
Количество полок (Rack units) 42U
Максимальная нагрузка веса 400 кг (статическая нагрузка)
Приспособление полок Нет информации
Съемные боковые панели Да
ГАБАРИТЫ, ВЕС И ЦВЕТ
Габариты

Высота x ширина x глубина

1970 x 600 x 600 мм
Вес (кг) 70
Цвет Белый
ДОПОЛНИТЕЛЬНО
Специальные отметки Нет информации

Описание модели

Triton RMA-42-A66-CAX-A1 42U Free-Standing Cabinet
Описание на английском языке:


Welded cabinet with removable side panels and rear cover, 
IP20, capacity 400 kg.


A universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications, a large selection of sizes and options together with a wide selection of accessories and excellent development make it the best selling cabinet in our range.


Rigid construction

RMA has a robust welded construction. High quality processing and the newest technologies ensure a perfect look of the cabinet.


Flexible door opening

The hinge system allows the door to open almost 180°. The door can be easily removed and re-mounted to change the direction of opening.


Triton handles

We manufacture our own handles for the free-standing cabinets. By changing the plastic module (not included), a traditional  or semi-cylindrical lock insert can be used. Patent: PUV 2013-27443


Adjustable vertical rails

Vertical 19” rails can be adjusted freely in any depth of the cabinet. This simplifies mounting of the device and configuration of connecting cables.


Removable side panels and rear cover

RMA has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover.


Door for fan units

With this cabinet type, it is possible to order a special metal door ready for mounting RAx-CH-X0x-X3 fan units. Further information is available in the section Active cooling.


Break-out blanking panels

Entry openings for cables in the rear part of the cabinet are covered with breakout-type blanking panels. It is possible to use a blanking panel with a brush in cable opening to avoid dust penetration. The fringe edge serves to protect cables from damage (both are parts of the cabinet supply).


Opening for a fan unit

A large opening covered with a breakout-type blanking panel enables mounting and removal of the Triton fan unit from outside of the cabinet without a need of using screws.


Castors, levelling feet

Prepared for mounting castors and levelling feet.


The back side of the cabinet

On the rear cover of the cabinet are two cable openings covered with breakout panels. One is at the top and one at the bottom of the rear cover. Other cable entries are on the ceiling and the base of the cabinet.


Perforated frame

The RMA cabinet has a perforated frame to ensure cooling air has access to the equipment inside. Cooling can be augmented by installing fan units.


Bonding

All removable parts are bonded together according to the relevant standards.


Flex frame

(for cabinet of 800 mm width) This system enables sliding vertical rails to be installed in a span of 19“, 21“ and 23“, just as needed for the equipment being used.


Middle pair of vertical rails

For cabinets deeper than 800 mm a third pair of vertical rails is supplied. An open profile means that the middle rails do not limit installation of deeper devices.


Swing frame

It is possible to equip the RMA and RZA cabinets with the swing frame with loading capacity 100 kg. Maximum available depth of the 19“ accessories is 330 mm.

Отзывы

0.0 из 5 звездочек (Всего 0 оценок)

5★
4★
3★
2★
1★
Triton Triton RMA-42-A66-CAX-A1 42U Free-Standing Cabinet Triton RMA-42-A66-CAX-A1 42U Free-Standing Cabinet
Описание на английском языке:


Welded cabinet with removable side panels and rear cover, 
IP20, capacity 400 kg.


A universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications, a large selection of sizes and options together with a wide selection of accessories and excellent development make it the best selling cabinet in our range.


Rigid construction

RMA has a robust welded construction. High quality processing and the newest technologies ensure a perfect look of the cabinet.


Flexible door opening

The hinge system allows the door to open almost 180°. The door can be easily removed and re-mounted to change the direction of opening.


Triton handles

We manufacture our own handles for the free-standing cabinets. By changing the plastic module (not included), a traditional  or semi-cylindrical lock insert can be used. Patent: PUV 2013-27443


Adjustable vertical rails

Vertical 19” rails can be adjusted freely in any depth of the cabinet. This simplifies mounting of the device and configuration of connecting cables.


Removable side panels and rear cover

RMA has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover.


Door for fan units

With this cabinet type, it is possible to order a special metal door ready for mounting RAx-CH-X0x-X3 fan units. Further information is available in the section Active cooling.


Break-out blanking panels

Entry openings for cables in the rear part of the cabinet are covered with breakout-type blanking panels. It is possible to use a blanking panel with a brush in cable opening to avoid dust penetration. The fringe edge serves to protect cables from damage (both are parts of the cabinet supply).


Opening for a fan unit

A large opening covered with a breakout-type blanking panel enables mounting and removal of the Triton fan unit from outside of the cabinet without a need of using screws.


Castors, levelling feet

Prepared for mounting castors and levelling feet.


The back side of the cabinet

On the rear cover of the cabinet are two cable openings covered with breakout panels. One is at the top and one at the bottom of the rear cover. Other cable entries are on the ceiling and the base of the cabinet.


Perforated frame

The RMA cabinet has a perforated frame to ensure cooling air has access to the equipment inside. Cooling can be augmented by installing fan units.


Bonding

All removable parts are bonded together according to the relevant standards.


Flex frame

(for cabinet of 800 mm width) This system enables sliding vertical rails to be installed in a span of 19“, 21“ and 23“, just as needed for the equipment being used.


Middle pair of vertical rails

For cabinets deeper than 800 mm a third pair of vertical rails is supplied. An open profile means that the middle rails do not limit installation of deeper devices.


Swing frame

It is possible to equip the RMA and RZA cabinets with the swing frame with loading capacity 100 kg. Maximum available depth of the 19“ accessories is 330 mm.
RMA-42-A66-CAX-A1 397.04
Задать вопрос

captcha
Bверх