Все категории
5775
Получи в СРЕДУ
В корзину Кол - во:

Варианты доставки:

PICKUP В пунктах доставки
В среду (01.04) после 14:00
ADDRESS C доставкой на адрес
В среду (01.04) после 18:00

Главные параметры товара:

  • Тип: Мультифункциональные сенсоры
  • Система питания: Батарей
Больше об этом товаре

ПОДРОБНАЯ ИНФОРМАЦИЯ

Производитель Fibaro
Тип Мультифункциональные сенсоры
Система питания Батарей
Спецификация Работает с системой Apple HomeKit
С сенсором температуры и света
Bluetooth
Рабочая температура: 0-40°C
Дистанция определения: 50 м
Диаметр: 46 мм
RoHS

Описание модели

Fibaro FGBHMS-001 Motion Sensor for Apple HomeKit
Описание товара на английском языке:

FIBARO Motion Sensor is a HomeKit-enabled multi-sensor using Bluetooth® low energy wireless technology. Along with detecting motion, the accessory measures temperature and light intensity. Built-in accelerometer detects tampering with the accessory. Every time the movement is detected, Motion Sensor will glow in different colour depending on the temperature.

Motion detection
The Motion Sensor detects movement using PIR sensor and reports it to your iOS device. Blink of LED indicates detected motion. Color of blink is dependent on current ambient temperature (smooth transition through blue, green and red). Brightness of blink is adjusted by measured light intensity. NOTE: Use app that allows to configure parameters to adjust sensitivity, sustain time and LED indication for motion detection.

Tamper detection
The Motion Sensor detects tampering when accessory is moved and reports it to your iOS device. Tampering is indicated with an alternate blinking in red, blue and white. NOTE: Use app that allows to configure parameters to adjust sensitivity and indications for tamper detection.

Temperature measuring
The Motion Sensor measures ambient temperature every 5 minutes. If the measured temperature differs from previously reported by at least 2°C (3.6°F), accessory reports it to your iOS device. NOTE: The accessory measures temperature in the place of installation. Remember that temperature near the ceiling may differ from that on eye-level or the floor.

Battery level measuring
The Motion Sensor measures battery level every 24 hours and reports it to your iOS device. Additionally, if battery level is below 15%, the accessory will report low level battery status to your iOS device.

Light intensity measuring
The Motion Sensor measures light intensity. If the measured light intensity differs from previously reported by at least 200 lux, accessory reports it to your iOS device. NOTE: The accessory measures light intensity in the place of installation, not where the sensor is pointed.

Отзывы

0.0 из 5 звездочек (Всего 0 оценок)

5★
4★
3★
2★
1★
FIBARO Fibaro FGBHMS-001 Motion Sensor for Apple HomeKit Fibaro FGBHMS-001 Motion Sensor for Apple HomeKit
Описание товара на английском языке:

FIBARO Motion Sensor is a HomeKit-enabled multi-sensor using Bluetooth® low energy wireless technology. Along with detecting motion, the accessory measures temperature and light intensity. Built-in accelerometer detects tampering with the accessory. Every time the movement is detected, Motion Sensor will glow in different colour depending on the temperature.

Motion detection
The Motion Sensor detects movement using PIR sensor and reports it to your iOS device. Blink of LED indicates detected motion. Color of blink is dependent on current ambient temperature (smooth transition through blue, green and red). Brightness of blink is adjusted by measured light intensity. NOTE: Use app that allows to configure parameters to adjust sensitivity, sustain time and LED indication for motion detection.

Tamper detection
The Motion Sensor detects tampering when accessory is moved and reports it to your iOS device. Tampering is indicated with an alternate blinking in red, blue and white. NOTE: Use app that allows to configure parameters to adjust sensitivity and indications for tamper detection.

Temperature measuring
The Motion Sensor measures ambient temperature every 5 minutes. If the measured temperature differs from previously reported by at least 2°C (3.6°F), accessory reports it to your iOS device. NOTE: The accessory measures temperature in the place of installation. Remember that temperature near the ceiling may differ from that on eye-level or the floor.

Battery level measuring
The Motion Sensor measures battery level every 24 hours and reports it to your iOS device. Additionally, if battery level is below 15%, the accessory will report low level battery status to your iOS device.

Light intensity measuring
The Motion Sensor measures light intensity. If the measured light intensity differs from previously reported by at least 200 lux, accessory reports it to your iOS device. NOTE: The accessory measures light intensity in the place of installation, not where the sensor is pointed.
FGBHMS-001 57.75
Задать вопрос

captcha
Bверх