Все категории
500
Получи в СУББОТУ
В корзину Кол - во:

Варианты доставки:

SELF_DELIVERY Получи в клиентском центре 1a.lv
В субботу (27.07) после 12:00
PICKUP В пунктах доставки
В субботу (27.07) после 14:00
ADDRESS C доставкой на адрес
29.07.2019

Главные параметры товара:

  • Тип: Клей монтажный
  • Объем (мл): 750
Больше об этом товаре
В ПОДАРОК:

Бесплатная доставка в "K-Senukai"!

ПОДРОБНАЯ ИНФОРМАЦИЯ

Производитель Briko
Тип Клей монтажный
Объем (мл) 750
Специальные отметки Полностью сухой после: 24 часа
Водонепроницаемый: да

Описание модели

Описание товара на английском языке:



Usage: Briko Polyfix is ​​a one-component moisture-hardening polyurethane adhesive, water insoluble and water resistant. After hardening, it forms a durable joint that can be primed, plastered, and glued.
Briko Polyfix is ​​particularly suitable for bonding and mounting high performance polystyrene (EPS, EPS - P, XPS, etc.), rigid polyurethane foam (PU / PIR) and mineral fiber panels on concrete, plastic and masonry surfaces. Also suitable for filling joints between insulation boards. Surface Preparation: The surface should be clean, smooth and clean of dust and oils. It is recommended that the substrate surface be sprayed with water a little before. Instruction: If the product is used at low temperatures, keep the bottle at room temperature for at least one hour before using it. Screw the balloon into the gun Briko.

Tips: Shake the bottle vigorously (at least 30 times) before use. Install the desired foam dose (diameter 3 - 4 cm) with the help of a gun and apply 2 - 4 centimeters of foam to the edges of the polystyrene (or other material) board. In addition, apply the adhesive in the longitudinal direction of the board with at least one line. After two minutes, attach the insulation plate to the wall. The adhesive will smooth the surface in about 20 minutes, depending on the ambient temperature (air and surface). The most suitable working temperature is +5 ° C to +35 ° C. After 2 hours, the glued surfaces can be treated. Precise usage information is available on the data sheet.

Safety: Do not spray on open flames or other heated materials. Keep away from sources of ignition - do not smoke. A data sheet is available upon request. Storage: Store in the original package at a temperature between + 5 ° C and + 25 ° C for 12 months from the date of manufacture (see bottom of cylinder). Flammability class: F.

Отзывы

0.0 из 5 звездочек (Всего 0 оценок)

5★
4★
3★
2★
1★
Briko Briko Polyfix Polystyrene Board Adhesive 750ml Описание товара на английском языке:



Usage: Briko Polyfix is ​​a one-component moisture-hardening polyurethane adhesive, water insoluble and water resistant. After hardening, it forms a durable joint that can be primed, plastered, and glued.
Briko Polyfix is ​​particularly suitable for bonding and mounting high performance polystyrene (EPS, EPS - P, XPS, etc.), rigid polyurethane foam (PU / PIR) and mineral fiber panels on concrete, plastic and masonry surfaces. Also suitable for filling joints between insulation boards. Surface Preparation: The surface should be clean, smooth and clean of dust and oils. It is recommended that the substrate surface be sprayed with water a little before. Instruction: If the product is used at low temperatures, keep the bottle at room temperature for at least one hour before using it. Screw the balloon into the gun Briko.

Tips: Shake the bottle vigorously (at least 30 times) before use. Install the desired foam dose (diameter 3 - 4 cm) with the help of a gun and apply 2 - 4 centimeters of foam to the edges of the polystyrene (or other material) board. In addition, apply the adhesive in the longitudinal direction of the board with at least one line. After two minutes, attach the insulation plate to the wall. The adhesive will smooth the surface in about 20 minutes, depending on the ambient temperature (air and surface). The most suitable working temperature is +5 ° C to +35 ° C. After 2 hours, the glued surfaces can be treated. Precise usage information is available on the data sheet.

Safety: Do not spray on open flames or other heated materials. Keep away from sources of ignition - do not smoke. A data sheet is available upon request. Storage: Store in the original package at a temperature between + 5 ° C and + 25 ° C for 12 months from the date of manufacture (see bottom of cylinder). Flammability class: F.
000051107502 5.00
Задать вопрос

captcha
Bверх