Корпус компьютера SilentiumPC, черный цв.

Описание товара на английском языке:




The Ventum VT4 TG housing features a high airflow provided by the open front panel as well as two Sigma HP 120 mm CF high pressure fans. The Ventum VT4 TG has a spacious design that accommodates 345 mm graphics cards and a 159 mm high CPU air cooling system. A liquid cooling system (AIO) in 240 or 280 sizes fits seamlessly above or in front of the case. Fresh air enters through a ventilated front with numerous 0.9 mm diameter apertures. This makes the SilentiumPC Ventum VT4 TG the perfect base even for high-performance computers equipped with e.g. 12-core, high-impact CPUs and modern graphics cards with increased TDP and an extensive coolers.

Exceptionally high airflow
Proper ventilation of the Ventum VT4V TG case interior and low temperatures of the installed components are ensured thanks to the specially designed open front with ultra-high airflow and two high-pressure Sigma HP 120 mm CF fans.

Two high pressure Sigma HP 120 mm CF fans
The Ventum VT4 TG case is equipped with two high-pressure Sigma HP 120 mm CF fans with 9 specially profiled blades that generate high static pressure, which, combined with a maximum rotation speed of 1200 RPM (± 10%), ensures high airflow even in the presence of a dust filter.

PWM splitter
Ventum VT4 TG enclosure is equipped with a splitter which enables all fans to be connected to one connector on the motherboard or controller.

Windowed side panel
The large side panel made of tempered glass provides a perfect view of the components inside your Ventum VT4 TG case.

AIO LC compatibility
The user can also install an integrated liquid cooling system (AiO) on the processor. Ventum VT4 TG will accommodate 120/140/240 or 280 mm radiators both at the front and under the top of the case. The top of the case has been raised so that the AiO radiator suspended under it doesn't interfere with the motherboard, and thus the RAM modules installed on it.

SSD mounts behind the motherboard
The lower chamber and service bay of the Ventum VT4V TG provides space for two 3.5" disks - mounted with vibration-reducing rubber screws - and three 2.5" carriers bolted to the rear of the partition in special channels.

I/O panel: 2× USB 3.2 Gen 1
All the important ports and buttons at your fingertips – 2 × USB 3.2 Gen1 (3.0), audio ports and POWER and RESET buttons.

Dust filters
A set of dust filters – under the power supply and on the top of the case, conveniently mounted in a magnetic frame – as well as a specially designed front panel with small openings about 0.9 mm in diameter protect the computer from getting dirty. Simply wipe it off with a cloth to remove the layer of dust caught there. Air can flow freely through these openings, which effectively lowers the temperature of the components mounted inside the Ventum VT4 TG case.