Водный блок Alphacool, многоцветный

Thanks to the patented ramp system, the new Alphacool Eisblock XPX Aurora CPU water coolers offer the highest performance paired with excellent quality. The new Aurora design in combination with the addressable digital RGB lighting offers many possibilities for excellent lighting of the CPU water cooler.

Performance in abundance!
Alphacool already developed and patented a new injection technology for the first Alphacool Eisblock XPX. The so-called "ramp system" ensures an even flow of water within the cooler and sits in front of the nozzle plate. As a result, the water is pressed evenly through the nozzle plate, which also distributes the water evenly over the cooler base. The cooling channels on the CPU cooler base have also been enlarged to a proud 34 x 32 mm in order to meet the ever increasing CPU DIEs. This applies in particular to multi-core processors with 4, 6, 8 or even 12 and more CPU cores. 81 cooling fins can be found on the cooler base so that the heat can be released from the CPU to the water as quickly as possible. The fin structure was reduced to just 0.2 mm in order to create the largest possible surface in the smallest of spaces.

And the lighting?
All new Eisblock XPX Aurora Plexi CPU water coolers are delivered including an addressable digital RGB lighting. The aRGB LEDs are integrated directly into the CPU water cooler and run once around the entire cooling block. The up to 15 digital RGB LEDs illuminate the entire cooling block very intensively. Of course, the brightness can be controlled using an appropriate controller. And as with all aRGB LEDs, all known effects can be created. From simple color changes and wave effects to rainbow lighting, everything is possible. Of course, the Alphacool Eisblock Aurora coolers can also be connected and controlled to mainboards via the 3-pin 5V connection. The cable also has an integrated Y adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y adapters. Only extension cables should be required if you want to connect the products in series.

Is assembly difficult?
The installation of the Eisblock XPX Aurora (Edge) cooler is very easy. The backplate is simply glued to the mainboard from behind. The mounting frame for the AMD or Intel socket is clamped onto the cooler and the corresponding mounting screws are pre-attached to this frame. Then the cooler is only placed on the processor and screwed.