Воздушный охладитель для процессора Cryorig Low Profile C1

Описание товара на английском языке:
Cryorig, a relatively young company, quickly became famous for its efficient and innovative products in the field of CPU cooling. The team of experienced radiator and OC experts rely on high-quality materials and innovative combinations of individual components to get the most out of air coolers. At the same time, Cryorig attaches great importance to keeping the installation of its CPU coolers as simple as possible. The coolers from Cryorig like this C1 low-profile CPU cooler also offer an impressive aesthetic.
The Cryorig C1 at a Glance

• Low-profile CPU cooler in copper and aluminium for best cooling performance
• Specially arranged cooling fins ensure optimum removal of residual heat
• Suitable for processors with up to 140 Watt TDP
• Height: 74 mm
• Compatible with all current AMD- and Intel sockets
• Uncomplicated installation

Optimised Airflow Output for Optimal Cooling Cryorig's low-profile C1 CPU cooler uses six 6mm-thick sintered copper heatpipes that connect the nickel-plated copper base plate to the heat sink fins. The special feature is the design of the slats of the low-profile cooler. The cooling fins of the front area are 2.4 mm apart and the rear ones are only 1.8 mm apart. These different distances ensure an optimized output air flow. Cryorig calls it the Jet Fin Acceleration System . Thus, the heated air can be derived faster from the tower cooler. In addition, the heat pipes and fins are welded together in a special soldering process, so that there is ten percent more surface contact.

The Cryorig C1 comes with the slim XT140 fan. This means that the 74 mm high cooler fits into almost any ITX housing. Beneath the fan, there is room for 42 mm of RAM modules. As an effective anti-vibration measure, four rubber dampeners are embedded in the enclosed fan at the corners. This dampens the vibration transmission of the fan to the fins. The fan itself has extraordinarily quiet bearings, so that the noise level of the entire cooler remains quiet at 44 dB (A). Thanks to its outstanding performance and efficiency, the twin-tower cooler is suitable for processors with 240 watts TDP (Thermal Design Power).

The extremely easy assembly is particularly smart. The backplate is fixed by hand with knurled screws. This is followed by the holding frame for the CPU, which is also fastened with knurled screws. The heat sink is then screwed tight using the screwdriver provided. Thermal conductive paste and a cloth for removing residues are included in the bundle.