Barošanas bloks SilentiumPC Vero M3 600 W, 12 cm

The high performance of the Vero M3 600 W Bronze is the result of using proven high-end components, previously known rather from higher segments. Its basis are DC-DC converters as well as Taiwanese electrolytic and aluminum-polymer (solid state) Teapo capacitors, all certified to operate at temperatures up to 105⁰C.

The high efficiency of the Vero M3 600 W has been confirmed by the 80 PLUS® Bronze certificate. The measured efficiency of the power supply meets the requirements of the standard with a great deal: about 87% at 20% load, ~ 90% at 50% and over 87% at a demand equal to the maximum power of the power supply.

High efficiency means not only lower energy bills, but also less heat generated, and thus lower temperatures inside the power supply and its quieter operation. Thanks to this, a thermally controlled Sigma HP 120 mm fan with HBS bearing can operate at a very low speed (up to 750 RPM) up to half the rated power of the Vero M3 600 W semi-modular power supply. However, even at higher demand the fan does not spin above 1000 RPM: up to about 500 W. Thus, the noise generated by the fan is clearly quieter than in the previous family of Vero L2 / M2 power supplies.

One powerful +12 V line allows great freedom in computer configuration, regardless of whether it is to be a set for the gamer – with a balanced load generated by the processor and graphics card - or a workstation with an above-average performance and a demanding CPU. The Vero M3 600 W is able to provide 588 W on a +12 V line on a continuous basis.