Baterija Autel For EVO Nano Series, 2250 mAh

EVO Nano series is powered by a lithium-ion polymer battery. Improper use of lithium polymer/lithium-ion batteries can be dangerous. Please ensure that all the following battery usage, charging and storage guidelines are strictly followed.

• Only use the battery and charger provided by Autel Robotics. It is forbidden to modify the battery pack and its charger, or use third-party equipment to replace it.
• The electrolyte in the battery is extremely corrosive. If the electrolyte accidentally spills onto your skin or into your eyes, please wash the affected area with clean water and seek medical advice as soon as possible.

With a built-in Autel Newest Intelligent Battery Management System intelligently monitors battery power and various states of the battery, and can accurately calculate the remaining battery life to guarantee flight safety. It has multiple safety protections to prevent overcharge, overdischarge, overcurrent, overtemperature undertemperature, short circuit, etc. It also enables static equalization, self-discharge storage mode, and ultra-low power mode.

• Self-discharge protection - if the battery is stored in high temperature environment or it is not used for 6 days and the battery level is high, the self-discharge protection will be activated. The battery will automatically discharge to a safe level, and this discharging process takes 2~3 days. In this period, it is normal that the battery may be slightly hot.
• Low battery protection - in the case of low battery level, the battery will automatically enter sleep mode to avoid damage. Under this mode, there will be no reaction when pressing the power button. To wake up the battery, it is allowed to connect it with charger.
• Charging temperature protection - the battery will stop charging in the case of charging temperature lower than 5ºC (41ºF) or higher than 45ºC (113ºF).
• Overcurrent protection - the large charging current will seriously damage the battery, so the battery will stop charging in the case of excessive charging current.
• Overcharge protection - the battery will automatically stop charging after it is fully charged
• Balanced protection - each battery unit shall maintain voltage balance to avoid overcharge or overdischarg