Datora korpuss Krux Thea, melna krās.

KRUX Thea

The capacious KRUX Thea computer case - prepared for launching from the very beginning. Easy access to the interior through a hinged door, combined with the possibility of installing coolers up to a size of 420 mm, make this housing a perfect ally for people who want to start their adventure with self-built water cooling. Thea will accommodate motherboards up to ATX sizes as well as long graphics cards and power supplies . A set of magnetic ring filters protects against dust.

Ready for liquid cooling
When designing the structure, which eventually turned into the Thea housing, we decided to adapt a large part of the available space, also for the elements included in the manually folded cooling with various types of liquids.

It can even accommodate 420 mm coolers
As a result of our work, we managed to get enough space for 420 mm coolers with a thickness of 35 mm on the front (fans mounted in the grill behind the front panel), 360 mm on the top and 120 mm on the outlet. And what is the thickness and FPI? This is the question of how thick the build are you preparing.

Glass side doors
Access to the inside of the KRUX Thea housing is guarded by glass doors. We mounted them on a convenient hinge and equipped with an automatic closing system with magnets. Thanks to this solution, a glance at the computer's components and the LC status will be much easier, and more importantly, much faster. No screws, just one move and you can rummage through the computer.

Roomy interior
Inside the case, Thea can accommodate a mini- ITX , m-ATX or ATX motherboard. The motherboard can be matched with a graphics card up to 370 mm long, cooperating with a CPU cooled with a tower up to 165 mm high. All these components must be connected to a power supply in ATX format up to 220 mm long. Despite the possibility of mounting such large parts, there is still enough space for the liquid reservoir - necessarily in orange!

Data warehouse
Two separate data warehouses - that's what you will find in the KRUX Thea housing. You can fit two 3.5-inch media into the removable and convenient basket. Capacity? Today 20 TB each, tomorrow 50 TB, and in a week who knows? The second magazine is located on the back, two fully disassembled trays will hold one SSD or HDD 2.5 inch each.

Accessories that make the assembly of components more pleasant
We know very well how important a pleasant and thus efficient assembly is. The KRUX Thea housing has a set of Velcro straps hidden in the service bay, thanks to which cablecology is easy! The transfer of water cooling cables or hoses takes place through two passages, each of them covered with a rubber diaphragm, preventing possible abrasions and isolating the electronic components from the metal structure of the housing.

Airy construction
The external panels of the KRUX Thea enclosure have been designed with an emphasis on two factors - breathability. The front made of almost 100% mesh provides air circulation, supported by a 120 mm fan extracting gases. The upper and lower panel of the structure is perforated and covered with appropriate magnet-mounted filters, which on the one hand protect the interior from dust, and on the other, ensure adequate air flow, which is so important in the case of cooling the interior with liquid.

Solid build
The use of thick sheet metal and special ribs and bends allowed to obtain above-average stiffness of the entire housing. You don't have to worry that the housing will collapse under the weight of the radiator, we took care of everything, don't worry!

I / O panel with USB 3.0 and audio jacks
The side, top panel in the KRUX Thea housing has been filled with the most important buttons and connectors that are needed during everyday contact with a computer. Power button, reset button, optional third button for any adaptation, USB connectors and 3.5-inch output and input. Everything on the front, minimalist and modest at the same time.