Laivas motors Argo 40 LBS, 7.5 kg, 81.2 cm

The ARGO boat engine is made of good components: carbon fiber propeller, carbon fiber stem, ultraviolet-resistant plastic top, winding copper, the carbon holder is metal, so there will be no problems as with other manufacturers' engines, as the carbon heats up and sticks to the plastic walls of the holder due to friction over a long period of time, so the engine no longer works.

The wires are screwed firmly to the gearshift for good current contact (contacts from other manufacturers are inserted that do not hold firmly, become hot, and the gearshift melts). The axle on which the impeller is mounted is equipped with a bearing and a seal. Crocodile Cords

All engines are equipped with a three-bladed propeller. The set includes spare carbon brushes to replace them after a few years.
The engine is protected against salt water by an anti-corrosion coating.
The motor foot is made of fiberglass impact-resistant material.
The on-board holder is made of plastic that can withstand heavy loads and is resistant to ultraviolet rays.

• Carbon brush holder metal.
• Motor windings copper, axle with bearing.
• Adjustable motor position and height, tilt angle.
• 10 LED battery indicators that show the current battery discharge status.
• Speed ​​control: 5 forward gears, 3 reverse gears.
• Wing - 3 wings
• Power LBs - 40

Sets:

• Engine
• impeller
• impeller pin
• wrench tightening
• reserve carbon
• brushes
• Connection Terminals