Monitors NEC MultiSync P463, S-PVA, 60 Hz, 46"

The professional-grade construction of P463 panel contributes to 24/7 usage, an overall longer panel life, lower likelihood of the Mura effect from localized heat, virtually no image retention and the ability to use in landscape, portrait, face up or face down orientation.

Thanks to the adoption of an LED backlight, this P Series is much lighter and thinner than the previous P Series, even using the same rear metal cabinet structure.

The video signal can be daisy chained with one DisplayPort. This means that along with LAN control daisy chaining, just two cables manage everything for setup.

LAN Control daisy chaining enables all control to be looped out on RJ-45 and daisy chained by one LAN cable, which helps reduce both the number of cables and time for cabling work.

This P Series is equipped with an NFC function, enabling you to write and read the display setting data on a Smartphone or Tablet PC compatible with NFC / RF-tag. This “ Intelligent Wireless Data Function” is available even when the monitor is switched off and is helpful for power saving.

Expansion Slot

The expansion slot enables you to add an optional board, including OPS-compliant SBC*, which provides greater flexibility to install displays in locations without space for display devices like computers and display controllers. A slot for an analogue signal is under preparation.

The Multi stream function, when used with a DisplayPort, enables you to control multiple displays and display different content on each. This feature also enables you to make a 2 x 2 video wall to display 4K2K content at native resolution.

Use of the white LED backlight reduces power consumption up to 26 % compared to our former models. It also contains no mercury to reflect the consideration towards minimizing the impact on the environment.

Auto dimming functions have been enhanced in this P Series and not only enable automatic adjustment of the backlight by APL (average picture level) or brightness of the environment, but also enable switching to AUTO OFF or CUSTOM mode automatically when motion is not detected for a set time.

In addition to the current light sensor and IR receiver, this new optional control kit (KT-RC2) makes a motion sensor available for the P Series. This function is helpful to save the unnecessary power or make interesting use of the display.

To meet the industry regulations such as ErP, an auto-standby function has been added so that control commands can be received even when the display is in standby mode to save energy.

This function provides accurate proof that a display is working as established and is helpful when checking remotely on the status of a display installed at user's site.